Accessories

Our passion: your safety at heights

Fall arrest protection

We think about every detail. We offer a wide range of PPE to protect against falls from a height, technical advice and technical training.

A passion for safety at heights.

Backpack for storage and transport. It has a large main compartment and a large outside pocket with zipper closure.

ft-en-irudek-irubag-2-2

FT EN IRUDEK IRUBAG 2

Backpack

IRUBAG 2

IRUBAG 2 | Irudek

https://cms.irudek.com/uploads/2021/08/irudek.png

Irudek

Home

Products

Here you will find the most comprehensive range of fall arrest harnesses on the market in accordance with the most stringent European standards: EN361, EN358, EN813 y EN1497.

Harnesses

Connector holder accessory for the connector to be installed on any harness strap.

ft-en-prs-1

FT EN PRS 1

Harness accessories

PRS1

PRS1 | Irudek

In this section you will find gas detectors, ideal for portable use or confined spaces, with which you can identify leaks. These systems stand out for their robustness, light weight design and the quality of their equipment and software. We offer a large range of single or multi gas detectors.
Furthermore, we offer a fast, flexible and efficient technical assistance service.

Gas detection

We are pleased to present our range of protective PPE under the brand name Irudek Protection, where you will find the most comprehensive selection for the labour sector.

Range of protective PPE

Sensory protection

It allows for infra-red PC connection of the device to receive information. It also allows for the configuration, calibration and downloading of events logs.

ft-en-ir-link

FT EN IR LINK

Gas detector accessories

IR LINK

IR LINK | Irudek

Seat for vertical work, which offers extreme comfort for suspensions over a long period of time.
Equipped with two tool holder rings at the sides and another in the area below the seat.

ft-en-skyplay

FT EN SKYPLAY

SKYPLAY

SKYPLAY | Irudek

Device designed to relief the negative effects of suspension trauma in case of fall through the joint of straps embedded in each bag. Integrable in any harness webbing.

ft-en-suspension-trauma

FT EN SUSPENSION TRAUMA

manual-arneses-multi-2

MANUAL ARNESES MULTI

SUSPENSION TRAUMA

SUSPENSION TRAUMA | Irudek

The DOKING STATION MGT gas detection accessory allows for infra-red PC connection of the device to receive information. It also allows CO and H2S detectors to put on standby-mode, extending battery life by up to one year. It also allows for the configuration, calibration and downloading of events logs.

ft-en-docking-station-sgt

FT EN DOCKING STATION SGT

DOCKING STATION SGT

DOCKING STATION SGT | Irudek

The DOKING STATION SGT gas detection accessory allows for infra-red PC connection of the device to receive information. It also allows CO and H2S detectors to put on standby-mode, extending battery life by up to one year. It also allows for the configuration, calibration and downloading of events logs.

ft-en-docking-station-mgt

FT EN DOCKING STATION MGT

DOCKING STATION MGT

DOCKING STATION MGT | Irudek

Manual sampling kit. Includes one adapter, one suction bulb, 3 metres of tube, and one sampling probe.

ft-en-sp-pump-2

FT EN SP-PUMP

SP KIT PUMP

SP KIT PUMP | Irudek

Manual calibration kit includes:
-1x regulator 
-1x 4-gas bottle 
-1x tube 
-1x Thygon adapter

ft-en-kit-calibracion-manual-2

FT EN KIT CALIBRACION MANUAL

MANUAL CALIBRATION KIT

MANUAL CALIBRATION KIT | Irudek

Lightweight and durable gloves for work with ropes. It has three holes in the thumb, index and middle fingers for better grip.
Made of synthetic leather, reinforced with Kevlar on the palm to improve grip and provides increased durability and better abrasion protection. Elastic cuff in neoprene with Velcro fastening, Kevlar thread, and connection hole.
Levels of protection:
&#8211; Abrasion 2 
&#8211; Cut 2 
&#8211; Tear 3 
&#8211; Perforation 2

ft-en-eskua

FT EN ESKUA

dc-eskua-1-2

DC-ESKUA-1

manual-eskua-es-2

MANUAL ESKUA es

Gloves

ESKUA 200

ESKUA 200 | Irudek

250 g halyard, 50 m in length, to reach the highest branches with ease.

ft-en-for-250

FT EN FOR 250

Halyard

FOR 250

FOR 250 | Irudek

Watertight transport bag made with highly-resistant materials that prevent damp and dirt from entering the stored equipment. It has both top and side closure clips and shoulder straps.

ft-en-irusack-40

FT EN IRUSACK 40

Watertight bag

IRUSACK 40

IRUSACK 40 | Irudek

Watertight transport bag to prevent damp and dirt from entering the stored equipment, including transportation belt.

ft-en-irusack-10

FT EN IRUSACK 10

IRUSACK 10

IRUSACK 10 | Irudek

Climbing spurs to climb up and down trees when working at heights. Structure made of aluminium, leather straps and steel tips. Height-adjustable pads.

ft-en-for-33

FT EN FOR 33

Climbing spurs

FOR 33

FOR 33 | Irudek

Basic lightweight rucksack for the transport of the harness and absorber. It features cord straps for easier transportation.
10-litre capacity.

ft-en-lightbag

FT EN LIGHTBAG

Bags

LIGHTBAG

LIGHTBAG | Irudek

Watertight transport bag made with highly-resistant materials that prevent damp and dirt from entering the stored equipment.
It has top closure clips and shoulder straps.

ft-en-irusack-50

FT EN IRUSACK 50

IRUSACK 50

IRUSACK 50 | Irudek

Nylon rucksack for the transport of PPE, with handles sewn onto the top of the bag.
Dimensions: 47 x 22 x 17 cm

ft-en-nylon-mediana

FT EN NYLON MEDIANA

MEDIUM NYLON

MEDIUM NYLON | Irudek

Anchors are the most important part of a fall arrest system as they are the point at which these systems are connected. That is why at Irudek we manufacture different types of anchors, thus offering a solution for practically any type of work.

Anchoring devices

Extending fibreglass ladder with anchor point on the last rung. Insulation against electrical and thermal agents. Designed for the most complicated situations, it allows for the following work applications:
1. Against a secure post: secured using a positioning rope. 
2. Against an unstable post: two stabilising legs are attached. 
3. Against facades: two stabilising side legs are attached.

dc-iruladder

DC IRULADDER

ft-en-iruladder

FT EN IRULADDER

manual-iruladder

Manual Iruladder

Anchoring accessories

IRULADDER

IRULADDER | Irudek

At Irudek we manufacture a wide range of anchoring devices in accordance with the EN362 standard, in order to offer a wide variety of alternatives to the user.

Connectors

This positioning clamp has been designed to attach the connector to the clamping element or fall arrester. This prevents the connector from moving or flipping on the clamping element.

ft-en-lotu

FT EN LOTU

Connector accessories

SILVERLIGHT LOTU

SILVERLIGHT LOTU | Irudek

Twintail elastic tool-holder with a connector to be attached to the harness webbing.

ft-en-prs-2

FT EN PRS 2

PRS2

PRS2 | Irudek

Chest ascender kit, designed to be integrated into a fall arrest harness. To be used in counterbalance and rope ascents, achieving a more precise ascent while reducing effort. Its design minimizes the possibility of accidental rope escape.

ft-en-kit-krow

FT EN KIT KROW

KIT KROW

KIT KROW | Irudek

Spiral elastic tool-holder with a integrated connectors to be attached to the harness webbing.

ft-en-prs-3

FT EN PRS 3

PRS3

PRS3 | Irudek