Irudek manufactures a wide range of equipment for vertical work, rope-access work, rescue and evacuation.

Descenders and evacuation systems

Our passion: your safety at heights

Fall arrest protection

We think about every detail. We offer a wide range of PPE to protect against falls from a height, technical advice and technical training.

A passion for safety at heights.

Compact and light rescue hoist with three pulleys integrated into each of the two connectors to provide a gear ratio of 6:1 and 7:1. Quick and easy to instal thank to its flexible cover, avoiding the risk of friction and entanglement.
The HaulerBiner can be used in various ways:
<ol>
<li>As part of an aided system.</li>
<li>Connected to a fixed structure, gaining a mechanical advantage</li>
<li>Connected to a harness (moving element) gaining a mechanical advantage MA 7:1 (theoretical).</li>
<li>With a D4/D2 descender, as part of a load transfer.</li>
<li>As a tensing element in progression and/or safety systems.</li>
<li>As a stretcher handling device, using one or more HaulerBiner to easily change and adjust the position of the stretcher (STEF).</li>
</ol>

ft-en-haulerbiner-3

FT EN HAULERBINER

dc-hauler-biner-1-2-2

DC-HAULER-BINER-1

manual-hauler-1-2-2

MANUAL-HAULER-1

Evacuation systems

HAULERBINER

HAULERBINER | Irudek

Home

Products

Irudek

https://cms.irudek.com/uploads/2021/08/irudek.png

Rescue kit designed to facilitate and optimise the evacuation of injured people after a fall. The anchorage point for the rescue is secured through the cooperation of the injured person, by anchoring the connector to one of the fall arrest rings on their harness.
It includes a Ero descender, 105 cm HaulerBiner hoist, two 992 automatic connectors, a CTA02 anchorage strap, a 40 L Irusack rucksack and a 10.5 mm Boa Roll lanyard.

ft-en-rescue-kit-rk1-5-2

FT EN RESCUE KIT RK1

RK1 RESCUE KIT

RK1 RESCUE KIT | Irudek

Rescue kit designed to facilitate and optimise the evacuation of injured people after a fall. The anchorage point for rescue is secured by extending the rescue pole, where you will seek to &#8220;fish&#8221; the fall arrest ring by anchoring the connector to one of the fall arrest rings on their harness. It is designed for situations where access to and cooperation of the injured person is limited.
It includes a D4 descender, 105 cm HaulerBiner hoist, two 992 automatic connectors, a CTA02 anchorage strap, a 40 L Irusack rucksack and a 10.5 mm Boa Roll lanyard.

ft-en-rescue-kit-rk3-5-2

FT EN RESCUE KIT RK3

RK3 RESCUE KIT

RK3 RESCUE KIT | Irudek

Rescue kit designed to facilitate and optimise the evacuation of injured people after a fall. The anchorage point for rescue is secured by extending the rescue pole, where you will seek to &#8220;fish&#8221; the fall arrest ring by anchoring the connector to one of the fall arrest rings on their harness. It is designed for situations where access to and cooperation of the injured person is limited.
It includes a D4 descender, 105 cm HaulerBiner hoist, a Rescue Pert pole, two 992 automatic connectors, a CTA02 anchorage strap, a 40 L Irusack rucksack and a 10.5 mm Boa Roll lanyard.

ft-en-rescue-kit-rk2-2

FT EN RESCUE KIT RK2

RK2 RESCUE KIT

RK2 RESCUE KIT | Irudek

Descent and ascent system for rescue operations. The pulley system with 3:1 mechanical advantage enables people to ascent or descend loads with even less effort . The system can be set at various lengths, depending on usage requirements.
The system consists of:
2xPROBUS 65 
1xALF PRO431 
1xLIFT 
4&#215;1131 
1xIrusack 50

ft-en-alf-3-1

FT EN ALF 3 1

dc-alf31-1-2-2

DC-ALF31-1

manual-alf-1-2-2

MANUAL-ALF-1

ALF 3:1

ALF 3:1 | Irudek

Descent and ascent system for rescue manoeuvres. The pulley system with 5:1 mechanical advantage allows to ascend or descend loads with even less effort than the 3:1 system. The equipment can be configured in different lengths, depending on the need of use.
The system consists of:
2xPRO64BUS 
1xALF PRO 431 
1xLIFT 
4&#215;1131 
1xIrusack 50

ft-en-alf-5-1-3

FT EN ALF 5 1

ALF 5:1

ALF 5:1 | Irudek

The D1PRO Descender uses our patented D-Series progressive cam technology and a specifically designed rope with a 6 mm diameter to achieve optimal one-handed descent control with performance characteristics comparable to a rope descender device with an 11 mm diameter.
The D1PRO Descender is a compact, lightweight device that can be stored in the user&#8217;s harness and deployed efficiently as needed. The D1PRO Descender is an auto-stop device (descent stops when the user releases the control lever). The absence of a panic brake on this &#8216;PRO&#8217; model gives the user the freedom to descend without accidental activation of the panic brake. This can be useful in longer, faster descents and in emergency situations, when an efficient and uninterrupted descent is especially important.
The D1PRO ESCAPE (KT851) and D1PRO TACTICAL (KT850) descent kits have a nominal load of 140kg and are certified according to the EN341-D* standard.

KIT D1

KIT D1 | Irudek

Automatic evacuation equipment, allowing for a controlled descent, without the need for operator intervention.
Both ends of the rope are used for the descent, thus minimising the evacuation time. It includes an ascent wheel, which allows for which allows for the lifting of injured persons in rescue operations, a 9 mm semi-static rope and two aluminium connectors.
The rope length of the equipment is determined according to the meters of use required, with the maximum length being 200 m. Descents of up to two people are possible.

ft-en-ag10k-huba

FT EN AG10K HUBA

dc-ag10k-huba-1-2-2

DC-AG10K-HUBA-1

AG10K HUBA

AG10K HUBA | Irudek

Innovative, lightweight and minimalist descender for emergency/evacuation descent. It is equipped with a double-lock anti-panic system that activates both when the user releases the lever or when they activate it uncontrollably. Available length from 15 to 120 meters. It includes 1 D1 descender, Technora® or Ø6mm polyester rope, 1 Technora® or Dyneema® anchorage strap, 2 automatic aluminium connectors and transport bag. Compatible with with A1C1 self-rescue accessory.

ft-en-d1-pro-2

FT EN D1 PRO

D1 PRO

D1 PRO | Irudek

Automatic evacuation equipment, allowing for a controlled descent, without the need for operator intervention. Both ends of the rope are used alternatively for descents up to 500m and 225 kg (2 people). Its redundant brake system with two independent drums increases its inspection period to 10,000 meters of descent and, with the Irubox packaging, the annual inspection would be conducted every 10 years. This device is compatible with a hand drill.
It includes a Boreas device, a 10 mm semi-static rope and 3 automatic steel connectors. Descents of up to two people are possible.

This is Irudek

Information

Fall arrest protection

Products

Information

Sensory protection

Products

Information

Lifelines

Products

Information

Information

Products

Information

Products

Information

Products

Information

Descenders and evacuation systems

HAULERBINER

RK1 RESCUE KIT

RK3 RESCUE KIT

RK2 RESCUE KIT

ALF 3:1

ALF 5:1

KIT D1

AG10K HUBA

D1 PRO

BOREAS HUB

Fall arrest protection

Products

Information

Sign up to our newsletter