Irudek manufactures a wide range of equipment for vertical work, rope-access work, rescue and evacuation.

Descenders and evacuation systems

Our passion: your safety at heights

Fall arrest protection

We think about every detail. We offer a wide range of PPE to protect against falls from a height, technical advice and technical training.

A passion for safety at heights.

Aluminium bag specially designed for the Boreas Hub automatic evacuation equipment.
Heat-sealed with humidity indicator it protects the equipment from humidity and environmental conditions. It allows the service period to be extended to 10 years from the date of bagging.

ft-en-borebag-2

FT EN BOREBAG

BOREBAG

BOREBAG | Irudek

Home

Products

Irudek

https://cms.irudek.com/uploads/2021/08/irudek.png

Multi-anchorage plate for simple installations, it features one main anchor point and three auxiliary anchor points.

ft-en-pro300

FT EN PRO300

Multi-anchorage plates

PRO300

PRO300 | Irudek

The D4 is a descender designed for the most stringent users. Due to the metallic manufacturing of all its components, this descender is resistant to wear and tear, bumping and corrosion, far superior than conventional devices.
With this device, the user has precise and progressive control of all ascent handling and sloping plane progression, as well as the descent speed, even when wearing gloves. It also includes a double-lock anti-panic safety system.
The permitted maximum load of 240 kg enables the simultaneous descent of two persons in case of rescue, and makes it one of the best options when it comes to tension release systems.

ft-en-d4-2

FT EN D4

dc-d4-e-1-2-2

DC-D4-E-1

manual-d4-1-2-2

MANUAL-D4-1

Descenders

D4 | Irudek

The D4 Pro is a descender designed for the most stringent users. Due to the metallic manufacturing of all its components, this descender is resistant to wear and tear, bumping and corrosion, far superior than conventional devices.
With this device, the user has precise and progressive control of all ascent handling and sloping plane progression, as well as the descent speed, even when wearing gloves.
This model does not include an anti-panic lever.
The permitted maximum load of 240 kg enables the simultaneous descent of two persons in case of rescue, and makes it one of the best options when it comes to tension release systems.

ft-en-d4-pro-2

FT EN D4 PRO

D4 PRO

D4 PRO | Irudek

Chest ascender, designed to be integrated into a harness. For use in counterweights and rope ascents, achieving a more precise ascent while reducing effort. Its design minimizes the possibility of accidental rope escape.

ft-es-krow

FT ES KROW EVO

manual-krow

MANUAL KROW

dc-krow-2024-2

DC KROW 2024

KROW EVO

KROW EVO | Irudek

Ascent foot loop for vertical work, made of webbing to increase its durability. Light and with an adjustable length, it can be fixed to the foot for situations involving movements in vertical work.

ft-en-anka

FT EN ANKA

Ascenders

ANKA

ANKA | Irudek

Foot ascender for vertical or forest work, made of webbing to increase its durability.
This device provides faster and softer ascents, preventing user fatigue.

ft-en-stryder-3

FT EN STRYDER

STRYDER

STRYDER | Irudek

Compact and light rescue hoist with three pulleys integrated into each of the two connectors to provide a gear ratio of 6:1 and 7:1. Quick and easy to instal thank to its flexible cover, avoiding the risk of friction and entanglement.
The HaulerBiner can be used in various ways:
<ol>
<li>As part of an aided system.</li>
<li>Connected to a fixed structure, gaining a mechanical advantage</li>
<li>Connected to a harness (moving element) gaining a mechanical advantage MA 7:1 (theoretical).</li>
<li>With a D4/D2 descender, as part of a load transfer.</li>
<li>As a tensing element in progression and/or safety systems.</li>
<li>As a stretcher handling device, using one or more HaulerBiner to easily change and adjust the position of the stretcher (STEF).</li>
</ol>

ft-en-haulerbiner-3

FT EN HAULERBINER

dc-hauler-biner-1-2-2

DC-HAULER-BINER-1

manual-hauler-1-2-2

MANUAL-HAULER-1

Evacuation systems

HAULERBINER

HAULERBINER | Irudek

Ultra-light locking hand ascender for rope progression. Ergonomic handle designed to provide an optimal grip.
Equipped with different holes for the clamping element and the foot loop, designed for ascent with just one rope.

ft-en-lift-evo

FT EN LIFT EVO

dc-lift-evo-2024-2

DC LIFT EVO 2024

manual-lift-evo-2

MANUAL LIFT EVO

LIFT EVO

LIFT EVO | Irudek

Ultra-light weight pole made of fibreglass to connect the injured person from a higher area without having to reach them. Equipped with rescue connector 984.

ft-en-rescue-pert-2

FT EN RESCUE PERT

manual-rescue-pert-1-2-2

MANUAL-RESCUE-PERT-1

Accessories

RESCUE PERT

RESCUE PERT | Irudek

This device is a rescue ascender that acts on rope, straps and cable.
This innovation is recommended for providing an anchorage point on the clamping element from which you can make a one-off hoist or ascent during a rescue operation.
It is especially designed for situations where access to and cooperation of the injured person is limited.

ft-en-salve-3-2

FT EN SALVE

dc-rg10-salve-2

DC RG10 SALVE

manual-de-instrucciones-salve-copia-2

MANUAL DE INSTRUCCIONES SALVE - copia

SALVE

SALVE | Irudek

Rescue kit designed to facilitate and optimise the evacuation of injured people after a fall. The anchorage point for the rescue is secured through the cooperation of the injured person, by anchoring the connector to one of the fall arrest rings on their harness.
It includes a Ero descender, 105 cm HaulerBiner hoist, two 992 automatic connectors, a CTA02 anchorage strap, a 40 L Irusack rucksack and a 10.5 mm Boa Roll lanyard.

ft-en-rescue-kit-rk1-5-2

FT EN RESCUE KIT RK1

RK1 RESCUE KIT

RK1 RESCUE KIT | Irudek

Rescue kit designed to facilitate and optimise the evacuation of injured people after a fall. The anchorage point for rescue is secured by extending the rescue pole, where you will seek to &#8220;fish&#8221; the fall arrest ring by anchoring the connector to one of the fall arrest rings on their harness. It is designed for situations where access to and cooperation of the injured person is limited.
It includes a D4 descender, 105 cm HaulerBiner hoist, two 992 automatic connectors, a CTA02 anchorage strap, a 40 L Irusack rucksack and a 10.5 mm Boa Roll lanyard.

ft-en-rescue-kit-rk3-5-2

FT EN RESCUE KIT RK3

RK3 RESCUE KIT

RK3 RESCUE KIT | Irudek

Rescue kit designed to facilitate and optimise the evacuation of injured people after a fall. The anchorage point for rescue is secured by extending the rescue pole, where you will seek to &#8220;fish&#8221; the fall arrest ring by anchoring the connector to one of the fall arrest rings on their harness. It is designed for situations where access to and cooperation of the injured person is limited.
It includes a D4 descender, 105 cm HaulerBiner hoist, a Rescue Pert pole, two 992 automatic connectors, a CTA02 anchorage strap, a 40 L Irusack rucksack and a 10.5 mm Boa Roll lanyard.

ft-en-rescue-kit-rk2-2

FT EN RESCUE KIT RK2

RK2 RESCUE KIT

RK2 RESCUE KIT | Irudek

Descent and ascent system for rescue operations. The pulley system with 3:1 mechanical advantage enables people to ascent or descend loads with even less effort . The system can be set at various lengths, depending on usage requirements.
The system consists of:
2xPROBUS 65 
1xALF PRO431 
1xLIFT 
4&#215;1131 
1xIrusack 50

ft-en-alf-3-1

FT EN ALF 3 1

dc-alf-2

DC ALF

manual-alf-1-2-2

MANUAL-ALF-1

ALF 3:1

ALF 3:1 | Irudek

Descent and ascent system for rescue manoeuvres. The pulley system with 5:1 mechanical advantage allows to ascend or descend loads with even less effort than the 3:1 system. The equipment can be configured in different lengths, depending on the need of use.
The system consists of:
2xPRO64BUS 
1xALF PRO 431 
1xLIFT 
4&#215;1131 
1xIrusack 50

ft-en-alf-5-1-3

FT EN ALF 5 1

ALF 5:1

ALF 5:1 | Irudek

Rescue stretcher in polyethylene and easy to carry in a rucksack. Designed for both horizontal and vertical rescue operations. Easy to use and store. Includes a transport bag, straps and handles.

ft-en-eco-rescue

FT EN ECO RESCUE

manual-camilla-de-rescate-2024-2

MANUAL CAMILLA DE RESCATE 2024

ECO | Irudek

Evacuation triangle to be used in the rescue of injured people and which is quick and easy to install and can be adapted to work in any situation. Equipped with three anchorage rings.

ft-en-nest-3

FT EN NEST

manual-nest-triangulo-evacuacion-2019-3-2

MANUAL NEST TRIANGULO EVACUACIÓN 2019

NEST

NEST | Irudek

The D1PRO Descender uses our patented D-Series progressive cam technology and a specifically designed rope with a 6 mm diameter to achieve optimal one-handed descent control with performance characteristics comparable to a rope descender device with an 11 mm diameter.
The D1PRO Descender is a compact, lightweight device that can be stored in the user&#8217;s harness and deployed efficiently as needed. The D1PRO Descender is an auto-stop device (descent stops when the user releases the control lever). The absence of a panic brake on this &#8216;PRO&#8217; model gives the user the freedom to descend without accidental activation of the panic brake. This can be useful in longer, faster descents and in emergency situations, when an efficient and uninterrupted descent is especially important.
The D1PRO ESCAPE (KT851) and D1PRO TACTICAL (KT850) descent kits have a nominal load of 140kg and are certified according to the EN341-D* standard.

KIT D1

KIT D1 | Irudek

Automatic evacuation equipment, allowing for a controlled descent, without the need for operator intervention.
Both ends of the rope are used for the descent, thus minimising the evacuation time. It includes an ascent wheel, which allows for which allows for the lifting of injured persons in rescue operations, a 9 mm semi-static rope and two aluminium connectors.
The rope length of the equipment is determined according to the meters of use required, with the maximum length being 200 m. Descents of up to two people are possible.

ft-en-ag10k-huba

FT EN AG10K HUBA

dc-ag10k-huba-1-2-2

DC-AG10K-HUBA-1

AG10K HUBA

AG10K HUBA | Irudek

Simple pulley with brass bushings and an auxiliary anchorage in the lower area.

ft-en-pro65-bus-3-2

FT EN PRO65 BUS

dc-pro65-1-2-2

DC-PRO65-1

manual-poleas-1-2-2

MANUAL-POLEAS-1

Pulleys

PRO65 BUS

PRO65 BUS | Irudek

Swivel connector with two parts that turn independently preventing the rope or rope system from creating twists or uncomfortable loops.

ft-en-swiver

FT EN SWIVER

dc-swiver-2-2

DC SWIVER

SWIVER

SWIVER | Irudek

For very complex installations, this multi-anchorage plate features 15 different anchor points.

ft-en-pro320

FT EN PRO320

dc-pro320-1-2

DC-PRO320-1

PRO 320

PRO 320 | Irudek

For almost any type of installation, this multi-anchorage plate features one main anchor point, 5 auxiliary anchor points at the bottom, and two auxiliary anchor points at the side.

ft-en-pro310

FT EN PRO310

dc-pro310-1-2

DC-PRO310-1

manual-pro310-1-2-2

MANUAL-PRO310-1

PRO310

PRO310 | Irudek

Double pulley with brass bushings and an auxiliary anchorage in the lower area.

ft-en-pro64-bus

FT EN PRO64 BUS

dc-pro-64-bus-2-2

DC PRO 64 BUS

manual-poleas-1-2

PRO64 BUS

PRO64 BUS | Irudek

Oversized double pulley, for ropes of up to 16 mm, with brass bushing and auxiliary anchorage in the lower area.

ft-en-pro67-bus

FT EN PRO67 BUS

PRO67 BUS

PRO67 BUS | Irudek

Non-return two-way pulley with exceptional qualities, designed for hoisting heavy loads. The auxiliary anchorage on the lower area and the independent mechanisms of pulley and sheaves allow for various settings for counterweight and hoist operations.

ft-en-pro702-2

FT EN PRO702

dc-pro-702-bus-2-2

DC PRO 702 BUS

manual-poleas-2-2

MANUAL POLEAS

PRO702

PRO702 | Irudek

Innovative, lightweight and minimalist descender for emergency/evacuation descent. It is equipped with a double-lock anti-panic system that activates both when the user releases the lever or when they activate it uncontrollably. Available length from 15 to 120 meters. It includes 1 D1 descender, Technora® or Ø6mm polyester rope, 1 Technora® or Dyneema® anchorage strap, 2 automatic aluminium connectors and transport bag. Compatible with with A1C1 self-rescue accessory.

ft-en-d1-pro-2

FT EN D1 PRO

D1 PRO